Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    BCM-0117
    VOLVO

    BCM-0117 - Communication with the active yaw control sensor. An incorrect active yaw control sensor had been installed

    System

    Brake Control Module (BCM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    5 models

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Show models by year and engine (11)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006All engines except: B8444S
    • Volvo XC90 (2003–)2007Engine B5254T2, D5244T4 only
    • Volvo XC90 (2003–)2008–2010All engines except: B6324S, B8444S
    • Volvo XC90 (2003–)2011All engines except: B6324S5, B8444S
    • Volvo XC90 (2003–)2012All engines except: B6324S5
    • Volvo XC90 (2003–)2013–2014Engine B5254T9 only

    What does this fault code mean?

    There are two versions of the AYC sensor, one for two-wheel-drive cars and one for four-wheel-drive cars. If the brake control module finds that an AYC sensor not suited to the car has been fitted, the code is set. The fault is caused by the wrong sensor being fitted, not by the brake control module.

    Possible causes

    • The wrong AYC sensor is fitted

    What you can do

    1. 1Check that the correct AYC sensor is fitted for the car's drivetrain, and replace it with the right one if not
    2. 2The brake system is safety critical: do not replace the brake control module for this code, and have a workshop check the sensor
    3. 3After fitting the correct sensor, check that the fault has cleared and that the stability function works

    Symptoms you may notice5

    • Anti-spin warning lamp on
    • General yellow warning lamp on
    • Anti-spin does not work
    • Stability function does not work
    • Anti-skid does not work

    What the fault can affect1

    • Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.