VOLVO
BCM-0151 - Control module. Internal memory fault
System
Brake Control Module (BCM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006All engines except: B8444S
- Volvo XC90 (2003–)2007Engine B5254T2, D5244T4 only
- Volvo XC90 (2003–)2008–2010All engines except: B6324S, B8444S
- Volvo XC90 (2003–)2011All engines except: B6324S5, B8444S
- Volvo XC90 (2003–)2012All engines except: B6324S5
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
What does this fault code mean?
The brake control module has an internal memory fault. More precisely, initialisation of the CAN controller fails when the module is powered up, and then CAN communication is shut down.
Possible causes
- Fault inside the brake control module (BCM)
What you can do
- 1Read the codes in the other control modules and deal with any other codes first
- 2Check that the connector at the brake control module is secure and free from oxidation
- 3If the code has permanent status, a workshop should replace the brake control module, and the new unit must be programmed
- 4The brake system is safety critical: do not work on the brake control module yourself, and drive carefully until the fault is fixed
Symptoms you may notice5
- ABS warning lamp on
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid does not work
What the fault can affect2
- ABS, traction control, stability control and active yaw control (AYC) are disabled
- Communication with the brake control module is cut off entirely
General guidance for car owners. Diagnosis on the car can point to a different cause.