VOLVO
BCM-C001101 - Left Front Outlet Control. General Failure Information. General electrical failure
System
Brake Control Module (BCM)
Volvo models this fault code applies to
Applies to the following models:
13 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (16)
- Volvo C30 (2007–2013)2011–2013Engine D4162T, D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Engine D4162T, D5204T, D5204T5 only
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014All engines except: D82PHEV
- Volvo V60 (2011–)2015All engines except: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
What does this fault code mean?
The brake control module has registered an electrical fault in the outlet valve for the left front wheel in the hydraulic unit. The outlet valve releases brake pressure from the wheel during ABS and stability regulation. The fault may be due to an internal disturbance or a fault in the module.
Possible causes
- Fault inside the brake control module (BCM)
What you can do
- 1Activate the valves in the hydraulic unit with diagnostic equipment; if no ticking sound is heard, the module has an internal fault
- 2Clear the code and road test; if it returns, a workshop should replace the brake control module
- 3After replacement, programming and calibration are needed, as a new module is supplied without software
- 4The brake system is safety critical: do not work on the brake control module or hydraulic unit yourself, and drive carefully until the fault is fixed
Symptoms you may notice5
- Information lamp on
- General warning lamp on
- The brake circuit does not work and the warning lamp comes on
- Traction control does not work
- Anti-spin and anti-skid do not work
What the fault can affect3
- ABS is disabled
- Traction control, stability control and active yaw control (AYC) are disabled
- Electronic brake force distribution (EBD) and brake assist are disabled
General guidance for car owners. Diagnosis on the car can point to a different cause.