VOLVO
BCM-C111768 - Stability function. Algorithm error. Event-controlled information
System
Brake Control Module (BCM)
Volvo models this fault code applies to
Applies to the following models:
1 modelXC90 (2003–)
What does this fault code mean?
If the brake control module has had to perform an extended start-up check of the DSTC stability system because of several faults during the previous drive, the code is set at the next start. It is an information code that most often clears once no faults remain.
Possible causes
- One or more faults during the previous drive caused the start-up check to be extended
What you can do
- 1Read the codes in the brake control module and deal with any other codes first
- 2If this code is stored on its own it can be cleared
- 3If another code is stored at the same time, troubleshoot it according to its information
- 4Check whether the code returns after a new drive, and have a workshop check the brake system if it does
- 5The brake system is safety-critical, so have a workshop carry out any work on the module
Symptoms you may notice1
- Information lamp lit
General guidance for car owners. Diagnosis on the car can point to a different cause.