VOLVO
BECM-C106100 - Hybrid/EV Battery Pack Coolant Control Valve "A" Control Circuit High. General Failure Information. No sub type information
System
Battery Energy Control Module (BECM)
Volvo models this fault code applies to
Applies to the following models:
1 modelV60 (2011–)
Show models by year and engine (2)
What does this fault code mean?
The BECM controls the coolant flow in the battery cooling loop with a shut-off valve that switches the coolant between the battery cooler and the vehicle radiator. The signal commanding the valve is too high, which points to a fault in the valve or in the cable to it. Cooling of the battery may therefore be affected.
Possible causes
- Poor contact or oxidation in the connectors
- The control signal cable to the valve is short-circuited to voltage
- The battery cooling shut-off valve is damaged
What you can do
- 1Read and note the fault code, clear it and road test to check whether it returns
- 2Have a workshop check that the connectors in the cooling system are secure and free from corrosion
- 3Have a workshop check the cable between the control module and the valve for a short circuit
- 4Have a workshop with diagnostic equipment check the valve and replace it if needed
- 5The high voltage system should only be handled by qualified personnel, so have a workshop carry out all work on the battery and other high voltage parts
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.