Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    CCM-0008
    VOLVO

    CCM-0008 - Sun sensor. Signal too high

    System

    Climate Control Module (CCM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    5 models

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Show models by year and engine (5)
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S80 (1999–2006)1999–2004
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo XC90 (2003–)2003–2004

    What does this fault code mean?

    On cars with electronic climate control (ECC), the control module has received too high a signal from the sun sensor. Since the sensor does not give a usable value, the control module instead works from a stand-in value for solar load, so the cabin does not cool properly when the sun is strong.

    Possible causes

    • Contact resistance, oxidation or loose contacts in the connectors
    • Open circuit in the signal wire linking the control module to the sun sensor
    • Signal wire linking the control module to the sun sensor shorted to live voltage
    • Ground wire linking the control module to the sun sensor shorted to live voltage
    • Open circuit in the ground wire linking the control module to the sun sensor
    • Defective sun sensor

    What you can do

    1. 1With the ignition on, cover the sun sensor with your hand and check that the value on the climate panel drops
    2. 2Then hold a strong light, such as a torch, close to the sun sensor and check that the value rises
    3. 3Check the contacts at the sun sensor and at the control module for looseness, damage or corrosion
    4. 4Check the wiring for chafing and crushed areas
    5. 5Use a multimeter to check the signal and ground wires to the sun sensor for contact with live voltage or ground (the body)
    6. 6If the wiring is fine, have a workshop replace the sun sensor

    Symptoms you may notice1

    • The cabin does not cool down when the solar load is high

    What the fault can affect1

    • The control module uses a stand-in value for solar load instead of the measured one

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.