VOLVO
CCM-0061 - Recirculation damper motor. Faulty signal
System
Climate Control Module (CCM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The damper motor module for recirculation has given the climate control module a faulty signal value, which decides whether air comes from the cabin or from outside. The fault is probably caused by incorrect calibration after a loss of power, or by an internal fault in the module. Recirculation then cannot be used as it should.
Possible causes
- Internal fault in the recirculation damper motor module
- Incorrect calibration after a loss of power
What you can do
- 1After a loss of power, for example when the battery has been changed, the damper may be out of calibration. Clear the fault code and test drive to see whether it returns
- 2Check that the airflow changes when the recirculation button is pressed
- 3If the fault returns, have a workshop calibrate the damper motor module and replace it if the fault is permanent
- 4If you have a diagnostic tool, follow the damper position in live data while turning the control and check that it changes smoothly
Symptoms you may notice2
- No recirculation
- Air flow problem
General guidance for car owners. Diagnosis on the car can point to a different cause.