VOLVO
CCM-B108277 - Right Temperature Damper Motor. Mechanical Failures. Commanded position not reachable
System
Climate Control Module (CCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The climate control module (CCM) has registered a wrong step count between the two end positions of the right temperature damper motor. The damper therefore does not reach the correct position when controlled. This can be caused by a blocked damper or by the climate system being calibrated at the wrong temperature.
Possible causes
- Blocked damper
- Climate system calibrated at the wrong temperature
- Internal fault in the right temperature damper motor or its control module
What you can do
- 1Check that the damper motor sits correctly in place
- 2Check that the damper is not blocked or stuck, for example by a screw, a cable or a foam rubber gasket
- 3Read and clear the code, then road test the car to see whether it returns
- 4If the fault remains, have a workshop calibrate the climate control module with diagnostic equipment
- 5If the fault returns after calibration, activate the damper motor with a diagnostic tool and check that it moves
Symptoms you may notice2
- Cabin temperature does not match the setting
- Temperature control or air conditioning does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.