VOLVO
CCM-B108309 - Recirculation Damper Motor. General Failure Information. Component Failures
System
Climate Control Module (CCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The recirculation damper motor, which decides whether the air in the car is taken from outside or from inside the cabin, has a fault according to the climate control module (CCM). The fault may be in the motor, in its control module, or in the calibration after a loss of power.
Possible causes
- Internal fault in the recirculation damper motor
- Incorrect calibration after loss of power
- Internal fault in the control module for the recirculation damper motor
What you can do
- 1Check that the fuses are intact
- 2Try the recirculation mode and listen for whether the airflow changes
- 3Read and clear the code, then road test the car to see whether it returns
- 4Check that the connectors to the damper motor are secure and clean
- 5If the fault returns after clearing, have a workshop calibrate the climate control module and check the damper motor
Symptoms you may notice2
- No recirculation of the air
- Temperature control or air conditioning does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.