VOLVO
CCM-B10884A - LIN Bus B. System Internal Failures. Incorrect component installed
System
Climate Control Module (CCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (9)
What does this fault code mean?
The climate control module (CCM) has found that a component on LIN bus 2 has a configuration ID that does not match the expected value. This suggests the component is not meant for this car, for example a used control module with other software or hardware. Several heating and defog functions may then be affected.
Possible causes
- Incorrect configuration ID, since the module is not meant for this car
What you can do
- 1Has anyone recently replaced a control module or damper motor in the car? If so, check that it is meant for this particular car
- 2Check that each damper motor and seat heating module sits in the position its ID indicates
- 3Clear the code and road test the car to see whether it returns
- 4With a diagnostic tool, read the configuration of the connected modules; have a workshop replace any that do not suit the car
Symptoms you may notice5
- Mist on the windows and/or the outside mirrors
- Poor heating in the cabin
- Front seat heating does not operate
- Rear seat heating does not operate
- Windscreen defog or defrost does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.