Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    CEM-5A12
    VOLVO

    CEM-5A12 - Blower fan motor. Over heated

    System

    Central Electronic Module (CEM)

    Volvo models this fault code applies to

    Applies to the following models:

    5 models

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (11)
    • Volvo C30 (2007–2013)2007–2010
    • Volvo C30 (2007–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
    • Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2010
    • Volvo C70 (2006–2013)2011Engine B5244S4, B5254T7 only
    • Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
    • Volvo S40 (2004–2013)2004–2010
    • Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
    • Volvo V50 (2004–2013)2004–2010
    • Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5

    What does this fault code mean?

    The blower fan motor has sent a signal to the central electronic module (CEM) that it is overheated, and the fault code is then stored. Overheating can be caused by the motor working hard, for example if the fan wheel is blocked or the motor is damaged. The fault is checked by running the fan, which shows whether it is still present.

    Possible causes

    • Damaged fan motor
    • Blocked fan wheel

    What you can do

    1. 1Read and note the code, clear it and run the blower fan to see whether the fault returns
    2. 2Check that the fan wheel in the climate system turns freely and that nothing is in the way, by turning it by hand with the ignition off
    3. 3Check that the fan motor connector is secure and free from corrosion
    4. 4Use a multimeter to check that the signal and diagnostic wiring between the control module and the fan has no break and no contact with voltage supply
    5. 5Remedy what is found, and have a workshop replace the fan motor if it is damaged

    Symptoms you may notice3

    • Blower fan does not run
    • Blower fan runs at only one speed
    • Air flow problem

    What the fault can affect2

    • Fan runs more slowly than normal
    • Fan cannot start

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.