VOLVO
CEM-6F03 - Cruise control Set- button. Activated too long
System
Central Electronic Module (CEM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
CEM checks the signal from the cruise control Set- button. If the CEM notes that the Set- button has been held on for too long, the fault code is set, and then the cruise control does not work at all. The cause may be the button sticking in the pressed position or a damaged button.
Possible causes
- The Set- button stays stuck down in the pressed position
- Damaged Set- button
What you can do
- 1Check that the Set- button does not stick or stay jammed in the pressed position, and press it once to see that it springs back
- 2Clear the fault code and road test the car to see whether it returns
- 3If the fault is intermittent, it may have been caused by interference at start-up, and no further action is needed if it does not return
- 4If the button is damaged or sticks, a workshop should replace it
Symptoms you may notice1
- Cruise control does not function at all
General guidance for car owners. Diagnosis on the car can point to a different cause.