VOLVO
CEM-B106D13 - Side Marker Light. General Electrical Failures. Circuit open
System
Central Electronic Module (CEM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The central electronic module (CEM) supplies the side marker lights and monitors the current in the circuit. The fault shows that the supply circuit to the side marker lights is broken, so the lights receive no power. The fault is checked when the side marker lights are activated.
Possible causes
- Open circuit in the supply circuit to the side marker lights
What you can do
- 1Clear the code and switch the side marker lights on, then check whether the code comes back
- 2Check that the fuses for the side marker lights are intact
- 3Check that the connectors at the lights are fully engaged and not corroded
- 4Use a multimeter (ignition off, connector unplugged) to check that the wire to the side marker lights has no break between the connector and the lamp
- 5If you have a diagnostic tool, activate the side marker lights with the tool and check whether they come on
- 6If the fault remains, have a workshop check the wiring and the lights
Symptoms you may notice1
- Side marker lights or position lights do not work
General guidance for car owners. Diagnosis on the car can point to a different cause.