VOLVO
CEM-B10AC95 - Cruise Control Switch. Component Failures. Incorrect assembly
System
Central Electronic Module (CEM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The central electronic module (CEM) checks whether the car should have cruise control according to the vehicle configuration. The fault shows that the configuration is wrong, for example after a control module or function has been added or removed without the configuration being updated.
Possible causes
- The vehicle's configuration is incorrect
- A module or function was removed or fitted without the configuration being updated
What you can do
- 1Read off and note the code and check whether it returns when the ignition is switched on
- 2Check whether any control module, connector or function has been replaced, added or removed on the car, as this may be the cause
- 3Check that the cruise control buttons are fully engaged and not damaged
- 4Have a workshop check and update the vehicle configuration, as it must be set correctly
Symptoms you may notice1
- The cruise control does not work at all
General guidance for car owners. Diagnosis on the car can point to a different cause.