Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    CEM-B1D0715
    VOLVO

    CEM-B1D0715 - Right Turn Indicator. General Electrical Failures. Circuit short to battery or open

    System

    Central Electronic Module (CEM)

    Volvo models this fault code applies to

    Applies to the following models:

    9 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010–2015
    • Volvo XC60 (2009–)2010–2015
    • Volvo XC70 (2008–)2010–2015

    What does this fault code mean?

    The central electronic module (CEM) feeds the right turn indicator through an output. The code is set when the signal from the output is too high, which can be caused by an open circuit in the supply wire or the supply wire being shorted to voltage.

    Possible causes

    • Open circuit in the supply wire to the right turn indicator
    • The supply wire to the right turn indicator is shorted to voltage

    What you can do

    1. 1Read and clear the code, then switch on the right indicator and check that both lamps work
    2. 2Check that the indicator fuse is intact
    3. 3Look for breaks and loose connectors on the supply wire to the right indicator
    4. 4Use a multimeter to see whether the supply wire has voltage with the ignition off
    5. 5If the wire is intact, have a workshop with diagnostic equipment check the module output

    Symptoms you may notice4

    • The right front indicator does not work
    • The right rear indicator does not work
    • Text message in the display
    • Yellow warning symbol and text message in the display

    What the fault can affect2

    • After repeated driving cycles with the fault, the function is switched off permanently
    • Clearing the fault codes resets the output

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.