VOLVO
CEM-C1A5892 - Tire Pressure Sensor #2. Component Failures. Performance or incorrect operation
System
Central Electronic Module (CEM)
Volvo models this fault code applies to
Applies to the following models:
2 modelsV40 (2013–), V40 Cross Country (2013–)
Show models by year and engine (2)
What does this fault code mean?
The central electronic module (CEM) gets its information from the right front wheel's tyre pressure sensor via the remote receiver. The code is set when a sensor that sent messages during the same drive stops sending. The cause may be that a sensor not intended for the car has been fitted to the wheel.
Possible causes
- A tyre pressure sensor not intended for this car is fitted
What you can do
- 1Read and clear the code and drive the car a longer distance to see whether it comes back
- 2Tell the workshop if the wheels or tyres have recently been changed, for example to winter tyres
- 3Have a workshop check that the sensor in the right front wheel belongs to the car and replace it if it does not
Symptoms you may notice2
- Message in the display
- The tyre pressure monitoring warning comes on or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.