Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    CEM-U012600
    VOLVO

    CEM-U012600 - Lost Communication With Steering Angle Sensor Module. General Failure Information. No sub type information

    System

    Central Electronic Module (CEM)

    Volvo models this fault code applies to

    Applies to the following models:

    9 models

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Show models by year and engine (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2007–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008–2015
    • Volvo XC60 (2009–)2009–2015
    • Volvo XC70 (2008–)2008–2015

    What does this fault code mean?

    The fault code means that the control module storing the fault has lost, or has disrupted, its link to the steering angle sensor (SAS). The SAS is housed in the stalk module alongside the steering wheel module, which supplies its power. Several functions depend on the steering angle sensor, so several of them can be affected at the same time, including the stability function.

    Possible causes

    • No power reaching the steering angle sensor (SAS)
    • Broken ground wire to the steering angle sensor module
    • Poor contact in the connections
    • Open or shorted CAN wiring
    • A module not intended for the car, such as a used unit with other software or hardware

    What you can do

    1. 1Switch the ignition off and check the connectors to the steering angle sensor and the steering wheel and lever module for loose contact, oxidation and damage
    2. 2Check that the steering wheel module (SWM) has power and a good ground, since the sensor is supplied from it
    3. 3Check the fuse for the steering wheel module in the fusebox and the ground point for loose contact
    4. 4If you have a diagnostic tool, read whether the sensor responds. If it does not, check the power supply to the steering wheel module first
    5. 5Safety: the sensor affects steering and stability. Have a workshop check the system with diagnostic equipment. Replace the CEM only if testing has shown it is damaged

    Symptoms you may notice5

    • Cruise control does not work
    • Windscreen wiper only works at the lowest speed
    • Direction indicators do not work
    • Buttons on the steering wheel do not work
    • Stability function does not work

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.