VOLVO
CRM-2063 - Position encoder 2, rear roof. Invalid position
System
Chassis (Brakes, Steering, Suspension)
Volvo models this fault code applies to
Applies to the following models:
1 modelC70 (2006–2013)
Show models by year and engine (1)
What does this fault code mean?
The convertible roof control module has registered that position sensor 2 in the rear roof section shows a position that does not match the expected one, or that the voltage to the sensor is outside the approved range. The sensor is then working poorly or is incorrectly fitted. The roof may be operated only in a limited way or not at all.
Possible causes
- Position sensor not working
- Position sensor incorrectly fitted
What you can do
- 1With the ignition on, run the roof back and forth and see whether it moves evenly in both directions.
- 2Look for wear and signs that position sensor 2 is damaged.
- 3Check that position sensor 2 is correctly fitted and secure.
- 4If the sensor is damaged or incorrectly fitted and cannot be put right, have a workshop replace or correct it.
Symptoms you may notice1
- No or limited roof operation
General guidance for car owners. Diagnosis on the car can point to a different cause.