VOLVO
CRM-20F3 - Hall sensor 10. Invalid combination
System
Chassis (Brakes, Steering, Suspension)
Volvo models this fault code applies to
Applies to the following models:
1 modelC70 (2006–2013)
Show models by year and engine (1)
What does this fault code mean?
The power consumption of hall sensor 10 differs from normal in both the ON and OFF positions. The roof control module therefore cannot rely on the sensor signal, and the roof may work poorly or not at all. The fault can be a damaged sensor or a fault inside the control module.
Possible causes
- Damaged hall sensor
- Internal fault in the roof control module (CRM)
What you can do
- 1Read out and clear the fault code, test the roof and see whether the fault returns
- 2Inspect hall sensor 10 visually for wear or signs that it has failed
- 3If you have a diagnostic tool, follow hall sensor 10 in live data while the roof runs and check that the value changes
- 4If the sensor is damaged, a workshop should replace it. If the fault remains, a workshop needs to replace the convertible roof module (CRM)
Symptoms you may notice2
- No or limited roof operation
- Message in the text display
General guidance for car owners. Diagnosis on the car can point to a different cause.