VOLVO
CRM-3011 - Open calibration not performed
System
Chassis (Brakes, Steering, Suspension)
Volvo models this fault code applies to
Applies to the following models:
1 modelC70 (2006–2013)
Show models by year and engine (1)
What does this fault code mean?
The position sensors of the convertible roof have not been calibrated in the open position. Calibration is needed so the roof sections do not collide when the roof is operated, so the roof may work with limited function until the calibration is done. Calibration is a job for a workshop.
Possible causes
- The position sensors have not been calibrated
What you can do
- 1Have a workshop calibrate the position sensors in both the open and closed position
- 2After calibration, read out and clear the fault code, then test the roof in both directions and check that the fault does not return
- 3Before calibration, check that the roof sections are not damaged or blocked by objects
Symptoms you may notice1
- No or limited roof operation
General guidance for car owners. Diagnosis on the car can point to a different cause.