VOLVO
CRM-C072 - Catch motor. Motor blocked
System
Chassis (Brakes, Steering, Suspension)
Volvo models this fault code applies to
Applies to the following models:
1 modelC70 (2006–2013)
Show models by year and engine (1)
What does this fault code mean?
The catch motor is not working, so the catch it controls cannot move as it should. The fault can be caused by a faulty or disconnected motor, a catch blocked mechanically, or an open circuit in the wire to the roof control module. A failed hall sensor or an internal fault in the control module can also cause the code.
Possible causes
- The catch motor is not working
- The catch is blocked mechanically
- The catch motor is disconnected
- Open circuit in the wire between the catch motor and the roof control module
- The hall sensor is not working
- Internal fault in the roof control module (CRM)
What you can do
- 1Read out and clear the fault code and check whether it returns
- 2Make sure nothing nearby, such as an object or a damaged part, is blocking the catch
- 3With a multimeter you can check that the wire to the catch motor has no break
- 4If you have a diagnostic tool, activate the catch motor and check that the position in live data switches between locked and unlocked
- 5If no fault is found, a workshop should check the hall sensor and replace the catch motor if needed
Symptoms you may notice2
- No or limited roof operation
- Message in the text display
General guidance for car owners. Diagnosis on the car can point to a different cause.