VOLVO
DDM-0014 - Control, left rear side window. Stuck in the active position
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
2 modelsS40 (2004–2013), V50 (2004–2013)
Show models by year and engine (2)
What does this fault code mean?
The driver door module (DDM) has registered that the switch for the power window in the left rear door has been held pressed for longer than permitted. The switch is then treated as stuck, and the module ignores the command to protect the window motor. The fault therefore points to a switch that stays pressed, not to a problem with the window itself.
Possible causes
- The switch has stuck in the pressed position
- Damaged switch in the window control panel
- Dirt or an object blocking the switch
What you can do
- 1Press and release the switch on the driver's control panel a few times and check that it springs back
- 2Check that no object or dirt is preventing the switch from moving
- 3Try the window again once the switch has been fully released
- 4If the switch is damaged or sticks again, the control panel needs replacing by a workshop
Symptoms you may notice1
- The power window in the left rear door does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.