VOLVO
DDM-0026 - LED, camera module Signal too high
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The driver's door control module has registered that the supply wire to the LED in the camera module of the driver's side door mirror is shorted to voltage. The LED may then be lit all the time or not light at all, and a message may appear in the text display.
Possible causes
- Supply wire to the LED shorted to voltage
What you can do
- 1Check the LED's function by starting the engine and watching whether it flashes three times when the BLIS system is activated
- 2Switch the ignition off, disconnect the LED's connector and check that the LED itself is intact
- 3Have a workshop check the wire for a short to voltage
- 4If the fault does not come back, no further action is needed, as it was most likely intermittent
Symptoms you may notice3
- Message in the text display
- The LED is lit all the time
- The LED does not light
General guidance for car owners. Diagnosis on the car can point to a different cause.