VOLVO
DDM-0027 - LED, camera module Open circuit
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The driver's door control module has registered a break in the supply wire to the LED in the camera module of the driver's side door mirror. The LED may also be without a connection, in which case it will not light. A message may appear in the text display.
Possible causes
- Break in the supply wire
- LED not connected
What you can do
- 1Start the engine and check whether the LED flashes three times when the BLIS system is activated
- 2Switch the ignition off, then check that the LED is properly connected and intact
- 3Have a workshop check the supply wire for breaks, contact resistance and oxidation
- 4If the fault does not return, no further action is needed, as it was most likely intermittent
Symptoms you may notice2
- The LED does not light
- Message in the text display
General guidance for car owners. Diagnosis on the car can point to a different cause.