VOLVO
DDM-002F - Camera module voltage supply Signal too low
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The driver's door control module has registered too low a signal on the supply wire to the camera in the driver's side door mirror. The wire is shorted to ground, so the LED for the BLIS system does not light. A message may appear in the text display.
Possible causes
- Supply wire to the camera shorted to ground
What you can do
- 1If the code appears on its own, clear it with your own tool, and no further action is needed
- 2If it appears together with DDM-0030, check the BLIS camera: start the engine and see whether the LED flashes three times when BLIS is activated
- 3Use a multimeter to check that the camera's supply wire has no contact with ground (the body)
- 4If a short to ground is found, have a workshop repair the wire
Symptoms you may notice2
- The LED does not light
- Message in the text display
General guidance for car owners. Diagnosis on the car can point to a different cause.