VOLVO
DDM-003C - Passenger-side window control. Signal too high
System
Driver Door Module (DDM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
The driver's door control module has registered too high a signal from the control for the passenger window. The control, which sits on the driver's door, is stuck in the active position, so the passenger-side window does not work electrically.
Possible causes
- Passenger window control on the driver's door stuck in the active position
What you can do
- 1Press the passenger window control on the driver's door a few times and check that it returns to rest
- 2Test the passenger window from the passenger's own switch, if fitted, to see whether the fault is in the driver's control
- 3Clear the code with your own tool and see whether it returns; if the fault is permanent, the control module needs replacing, which a workshop should do
- 4Look at the window fuse in the car's fuse box
Symptoms you may notice1
- The passenger-side window does not work electrically
General guidance for car owners. Diagnosis on the car can point to a different cause.