VOLVO
DDM-003D - Rear left side-window control. Signal too high
System
Driver Door Module (DDM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
The driver's door control module has registered too high a signal for the left rear window, because the control stands stuck in the active position. The left rear window then does not work electrically.
Possible causes
- Left rear window control on the driver's door stands stuck in the active position
What you can do
- 1Press the left rear window control from the driver's door a few times and check that it returns
- 2Test whether the window can be run from its own switch, if fitted, to see whether the fault is in the driver's control
- 3Clear the code with your own tool and see whether it returns; if the fault is permanent, the control module needs replacing, which a workshop should do
- 4Check the window fuse in the car's fuse box
Symptoms you may notice1
- The left rear window does not work electrically
General guidance for car owners. Diagnosis on the car can point to a different cause.