VOLVO
DDM-003E - Rear right side-window control. Signal too high
System
Driver Door Module (DDM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
What does this fault code mean?
The driver's door control module has registered too high a signal from the control for the right rear window. The control stays in the active position, and the window in the right rear door then does not work electrically.
Possible causes
- Right rear window control on the driver's door stays in the active position
What you can do
- 1Press the right rear window control on the driver's door a few times and check that it returns to rest
- 2Test the window from its own switch, if one is fitted, to see whether the fault is in the driver's control
- 3Clear the code with your own tool and see whether it returns; a permanent fault means the control module must be replaced by a workshop
- 4Check the window fuse in the car's fuse box
Symptoms you may notice1
- The right rear window does not work electrically
General guidance for car owners. Diagnosis on the car can point to a different cause.