VOLVO
DDM-6E03 - Mirror motor. Open circuit
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
What does this fault code mean?
The control module registers an open circuit in the signal to the power door mirror motor for up or down movement, which is detected when the function is used. Door mirror control then does not function.
Possible causes
- Open circuit in the signal cable for mirror up and down movement
- Blown fuse
What you can do
- 1Read out and note the fault code, clear it, then check with ignition on whether the mirror moves up and down
- 2Check the fuse for the power door mirrors in the fuse box and replace it if it is blown
- 3With ignition off, use a multimeter to check that the signal cable is not broken. Replace the cable if it is open
- 4Check the connectors in the mirror and in the harness for oxidation and loose contacts
- 5If no fault is found, have a workshop try a new power door mirror
Symptoms you may notice1
- Door mirror control does not function
General guidance for car owners. Diagnosis on the car can point to a different cause.