VOLVO
DDM-B117E72 - Front power window up. Mechanical Failures. Actuator stuck open
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The front door control module registers that the relay for the window motor, up, is inactive when it should be active. The relay has jammed in the inactive position, so the front door power window does not work.
Possible causes
- The relay has jammed in the inactive position
What you can do
- 1Read out and note the fault code, clear it, then raise the window with the switch to see if the fault returns
- 2Check that the window in the front door does not stick
- 3If you have a diagnostic tool, activate the window up function and listen for the relay and motor to start
- 4If the fault remains, have a workshop check the relay and the control module in the front door
Symptoms you may notice1
- Power windows do not work
General guidance for car owners. Diagnosis on the car can point to a different cause.