VOLVO
DDM-B117E73 - Front power window up. Mechanical Failures. Actuator stuck closed
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The front door control module registers that the relay raising the window is active when it should be inactive. The relay is stuck in the active position, so the front door power window does not work.
Possible causes
- The relay has jammed in the active position
What you can do
- 1Read out and note the fault code, clear it, then raise and lower the window with the switch to see if the fault returns
- 2Check that the window in the front door does not stick
- 3If you have a diagnostic tool, check whether the up relay shows as active when the switch is released
- 4If the fault remains, have a workshop check the relay and the control module in the front door
Symptoms you may notice1
- Power windows do not work
General guidance for car owners. Diagnosis on the car can point to a different cause.