VOLVO
DDM-B118D13 - Right blind spot warning indicator. General Electrical Failures. Circuit open
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (4)
What does this fault code mean?
The right front door module exchanges data with the right camera module (RCM) over the LIN bus. The fault is stored when the cable feeding the right indicator LED is broken. The LED then does not light, and a message may appear in the information display.
Possible causes
- Break in the cable feeding the LED
What you can do
- 1Read out and note the fault code, clear it, then test drive the car to see if it returns
- 2With ignition off, use a multimeter to check that the LED cable is not broken. Replace the cable if it has an open circuit
- 3Check the connectors in the right indicator for contact resistance and loose contact
- 4If the fault remains, have a workshop check the right camera module (RCM) and the control module in the right front door
Symptoms you may notice2
- LED does not light
- A message appears in the information display
General guidance for car owners. Diagnosis on the car can point to a different cause.