VOLVO
DDM-B12C415 - Mirror Turn Indicator. General Electrical Failures. Circuit short to battery or open
System
Driver Door Module (DDM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
What does this fault code mean?
The driver door module supplies the turn indicator in the driver-side outer mirror. The fault is stored when the current on the output is too low, which means the wire is broken, has contact with battery positive, or has a poor connection in the connectors.
Possible causes
- The supply wire is short-circuited to supply voltage
- Open circuit in the supply wire
- Contact resistance, oxidation or a loose connection in the connectors
What you can do
- 1Check that the fuses are intact
- 2Check whether the indicator in the mirror flashes when you use the turn signal
- 3Inspect the cable from the door to the mirror for chafing and pinching
- 4Use a multimeter to check that the wire is not broken and has no contact with battery positive
- 5Check the connectors in the door and at the mirror base for looseness and oxidation
- 6If the fault remains, have a workshop with diagnostic equipment check the control module and the mirror
Symptoms you may notice1
- The side marker or position light in the mirror does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.