Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    DDM-U001088
    VOLVO

    DDM-U001088 - Medium Speed CAN Communication Bus. Bus Signal / Message Failures. Bus off

    System

    Driver Door Module (DDM)

    Volvo models this fault code applies to

    Applies to the following models:

    3 models

    S60 (2011–), V60 (2011–), V60 Cross Country (2015–)

    Show models by year and engine (3)
    • Volvo S60 (2011–)2011–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    What does this fault code mean?

    The driver door module communicates on MS-CAN and has switched off its communication (bus-off). The fault is stored when communication with the central electronic module (CEM) has been interrupted. The cause may be an open circuit or short circuit between the CAN wires, or a poor connection in the connections. The module may need to be without power for a long time before it can communicate again.

    Possible causes

    • Short circuit between the CAN wires
    • Open circuit in one of the CAN wires
    • Contact resistance or oxidation in the contacts or connections

    What you can do

    1. 1Read the codes in the central electronic module (CEM) and diagnose them first
    2. 2Check that the fuses are intact
    3. 3Check the connectors in the door and at the cable entry for oxidation and loose connections
    4. 4Gently shake the wires and pull lightly on the connectors during the check, to see whether the fault returns
    5. 5If the fault is intermittent, clear the code and check that it does not reappear
    6. 6If the fault remains, have a workshop load new software into the module if it is faulty, and check the wiring in the CAN network

    Symptoms you may notice5

    • Central locking does not work, the doors cannot be locked or unlocked
    • The child safety lock in the rear doors does not work
    • The window lift does not work, works only partly or works incorrectly
    • The mirrors cannot be adjusted electrically
    • The illumination of the switch panel or the approach lighting does not work

    What the fault can affect2

    • The module switches itself off and stays off until the power supply has been disconnected
    • It can take a long time before the module can communicate again after a fault

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.