VOLVO
DEM-P060300 - Internal Control Module Keep Alive Memory (KAM) Error. General Failure Information. No sub type information
System
Differential Electronic Module (DEM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
What does this fault code mean?
The four-wheel drive control module (DEM) has a memory, EEPROM, in which fault codes, their counters and frozen values are stored. The code is stored when the module finds an internal fault in that memory or a fault in its software. The four-wheel drive is then disengaged while the fault remains. The remedy is to load new software first and then replace the module if the fault persists.
Possible causes
- Internal fault in the four-wheel drive control module (DEM)
- Faulty software in the module
- Damaged memory element in the module
- Damaged four-wheel drive control module (DEM)
What you can do
- 1Read and erase the code, then road test to see whether it returns
- 2Check that the fuses are intact and that the battery is well charged
- 3If the code returns, have a workshop load new software into the four-wheel drive control module
- 4If the fault remains after that, have the workshop replace the control module and calibrate it
Symptoms you may notice2
- Four-wheel drive and all-wheel drive do not work
- Warning symbol and message in the display
What the fault can affect1
- The four-wheel drive is disengaged while the fault remains
General guidance for car owners. Diagnosis on the car can point to a different cause.