VOLVO
DIM-U041568 - Invalid Data Received From Anti-Lock Brake System Control Module. Algorithm Based Failures. Event information
System
Driver Information Module (DIM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (10)
What does this fault code mean?
The instrument cluster (DIM) receives signals from the brake control module (BCM) with a lower quality than it can accept. The fault often shows up as a faulty trip meter, an ABS warning or a text message, and it usually lies in the brake control module rather than in the instrument cluster.
Possible causes
- The fault probably lies in the brake control module (BCM), which sends signals of too low quality
What you can do
- 1Read and note the fault codes in the brake control module and the instrument cluster, clear them and road test the car to see whether the fault returns
- 2Check the fuses for the brake system and the instrument cluster in the fuse box, and that the connectors are fully engaged
- 3If you have a diagnostic tool, read the wheel speeds in live data and check that all four wheels show similar values while the car rolls gently
- 4Do not work on the brake system yourself. ABS may be out of action, so drive carefully and have a workshop repair the fault promptly
- 5If the fault returns, have a workshop with diagnostic equipment check the brake control module and the communication
Symptoms you may notice4
- The trip meter shows a fault or does not work
- The ABS lamp comes on or behaves abnormally
- The trip computer does not work
- A text message and a warning symbol appear in the instrument cluster
General guidance for car owners. Diagnosis on the car can point to a different cause.