Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-002C
    VOLVO

    ECM-002C - Fuel quantity. Wrong quantity when stopped. Intermittent fault.

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    3 models

    S70 (1997–2000), S80 (1999–2006), V70 (1997–2000)

    Show models by year and engine (3)
    • Volvo S70 (1997–2000)1999–2000Engine D5252T MSA 15.8 only
    • Volvo S80 (1999–2006)1999–2001Engine D5252T MSA 15.8 only
    • Volvo V70 (1997–2000)1999–2000Engine D5252T MSA 15.8 only

    What does this fault code mean?

    The fuel quantity does not match when the car is stationary. At ignition-on the positions of the fuel quantity regulator are checked, and if the position sensor's signal differs too much from what is expected, the code is set. The fault is intermittent, meaning it comes and goes, and may not be present right now. The engine may then stall or fail to start.

    Possible causes

    • The regulator's signal wire is shorted to earth or battery voltage
    • Break in the signal or supply wire to the fuel quantity regulator
    • Faulty injection pump
    • Break in the wiring to the regulator's position sensor
    • The wires to the position sensor are shorted to earth

    What you can do

    1. 1Check the wiring between the injection pump and the fuel quantity regulator for intermittent breaks
    2. 2Check the connectors to the engine control module and the injection pump for play and oxidation. Clean them and make sure they are fully seated
    3. 3Because the fault is intermittent, note whether the engine stalls when the car is stationary or after a while of driving
    4. 4Clear the fault code and road test. If it returns, have a workshop investigate the fuel quantity regulator and the injection pump
    5. 5The injection pump is a workshop task, since the fuel system is under high pressure

    Symptoms you may notice2

    • The engine stalls
    • The engine does not start

    What the fault can affect1

    • Only basic boost pressure is allowed

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.