VOLVO
ECM-0121 - Electronic throttle unit, potentiometer 1.Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (13)
- Volvo C30 (2007–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
- Volvo C30 (2007–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
- Volvo C30 (2007–2013)2011–2013Engine B4204S3, B4204S4 only
- Volvo S40 (2004–2013)2005Engine B4184S11 only
- Volvo S40 (2004–2013)2006Engine B4184S11, B4184S8 only
- Volvo S40 (2004–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
- Volvo S40 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
- Volvo S40 (2004–2013)2011–2012Engine B4204S3, B4204S4 only
- Volvo V50 (2004–2013)2005Engine B4184S11 only
- Volvo V50 (2004–2013)2006Engine B4184S11, B4184S8 only
- Volvo V50 (2004–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
- Volvo V50 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
- Volvo V50 (2004–2013)2011–2012Engine B4204S3, B4204S4 only
What does this fault code mean?
The engine control module has registered that the voltage from potentiometer 1 in the throttle unit lies outside the expected range. The cause is most often a damaged potentiometer in the throttle unit, but a fault in the engine control module can also cause it.
Possible causes
- Damaged potentiometer 1 in the throttle unit
- Damaged engine control module
What you can do
- 1If you have a diagnostic tool, read the throttle position in live data and check that the value changes smoothly as the throttle is pressed and released
- 2Erase the fault code and test drive the car; if it returns, have a workshop check the throttle unit and the control module
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.