Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-0406
    VOLVO

    ECM-0406 - Position sensor (exhaust gas recirculation (EGR)). Signal too high

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    4 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (10)
    • Volvo C30 (2007–2013)2007Engine D4204T only
    • Volvo C30 (2007–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo C70 (2006–2013)2008Engine D4204T only
    • Volvo C70 (2006–2013)2009–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo S40 (2004–2013)2004–2006Engine D4204T, D4204T2 only
    • Volvo S40 (2004–2013)2007Engine D4204T only
    • Volvo S40 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo V50 (2004–2013)2004–2006Engine D4204T, D4204T2 only
    • Volvo V50 (2004–2013)2007Engine D4204T only
    • Volvo V50 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only

    What does this fault code mean?

    The control module monitors the EGR valve function and sets the fault if the signal from the position sensor is too high. The causes may be poor contact in the connections, an open circuit in the supply or signal wire, a signal wire shorted to voltage, or a damaged EGR valve.

    Possible causes

    • Contact resistance, oxidation or poor contact in the connections
    • Open circuit in the supply or signal wire
    • Signal wire short-circuited to voltage
    • Damaged EGR valve

    What you can do

    1. 1Switch off the ignition and check the connections to the EGR valve for poor contact, contact resistance and oxidation
    2. 2Look for chafing on the signal wire near the EGR valve, and use a multimeter to check that it is not shorted to voltage
    3. 3Also use a multimeter to check that the supply to the position sensor has no open circuit
    4. 4If you have a diagnostic tool, read the EGR position sensor value in live data at idle and see whether it stays consistently high
    5. 5If the fault remains, have a workshop with diagnostic equipment check the EGR valve

    Symptoms you may notice1

    • The check engine lamp lights or behaves abnormally

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.