Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-0490
    VOLVO

    ECM-0490 - EGR control. Signal too high

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    4 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (10)
    • Volvo C30 (2007–2013)2007Engine D4204T only
    • Volvo C30 (2007–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo C70 (2006–2013)2008Engine D4204T only
    • Volvo C70 (2006–2013)2009–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo S40 (2004–2013)2004–2006Engine D4204T, D4204T2 only
    • Volvo S40 (2004–2013)2007Engine D4204T only
    • Volvo S40 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo V50 (2004–2013)2004–2006Engine D4204T, D4204T2 only
    • Volvo V50 (2004–2013)2007Engine D4204T only
    • Volvo V50 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only

    What does this fault code mean?

    The engine control module monitors EGR control. A fault in the valve or its wiring that causes incorrect EGR control sets the code. The causes may be poor contact, the valve sticking from dirt and soot, an open or shorted wire, or a damaged valve.

    Possible causes

    • Poor contact or oxidation at the EGR valve connections
    • The EGR valve sticks because of dirt or soot
    • Open circuit in the cable to the EGR valve
    • Cable to the EGR valve shorted to ground or voltage
    • Damaged EGR valve

    What you can do

    1. 1Read out the fault code, erase it and road-test to see whether it returns
    2. 2Look at the EGR valve for dirt and soot, since a valve that sticks can cause the fault
    3. 3Switch off the ignition and check the valve connector for looseness, contact resistance and oxidation
    4. 4Use a multimeter to check that the cable to the EGR valve has no open circuit and is not shorted to ground or voltage
    5. 5If the fault remains, have a workshop with diagnostic equipment check the EGR valve and its wiring

    Symptoms you may notice1

    • The check engine lamp lights or behaves abnormally

    What the fault can affect1

    • EGR control is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.