VOLVO
ECM-060A - Engine control module (ECM). Internal fault
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (17)
- Volvo C30 (2007–2013)2007–2009Engine B4164S3, B4184S11, B4184S8, B4204S3, D4204T only
- Volvo C30 (2007–2013)2010Engine B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T only
- Volvo C30 (2007–2013)2011–2012Engine B4164S3, B4204S3, B4204S4 only
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4 only
- Volvo C70 (2006–2013)2008–2010Engine D4204T only
- Volvo S40 (2004–2013)2004Engine D4204T, D4204T2 only
- Volvo S40 (2004–2013)2005Engine B4164S3, B4184S11, D4204T, D4204T2 only
- Volvo S40 (2004–2013)2006Engine B4164S3, B4184S11, B4184S8, D4204T, D4204T2 only
- Volvo S40 (2004–2013)2007–2009Engine B4164S3, B4184S11, B4184S8, B4204S3, D4204T only
- Volvo S40 (2004–2013)2010Engine B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T only
- Volvo S40 (2004–2013)2011–2012Engine B4164S3, B4204S3, B4204S4 only
- Volvo V50 (2004–2013)2004Engine D4204T, D4204T2 only
- Volvo V50 (2004–2013)2005Engine B4164S3, B4184S11, D4204T, D4204T2 only
- Volvo V50 (2004–2013)2006Engine B4164S3, B4184S11, B4184S8, D4204T, D4204T2 only
- Volvo V50 (2004–2013)2007–2009Engine B4164S3, B4184S11, B4184S8, B4204S3, D4204T only
- Volvo V50 (2004–2013)2010Engine B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T only
- Volvo V50 (2004–2013)2011–2012Engine B4164S3, B4204S3, B4204S4 only
What does this fault code mean?
The engine control module (ECM) has two internal processors that compare the input signals for vehicle speed, accelerator pedal position and brake pedal position. If those signals differ, the code is set, and the fault may then lie in the control module or in one of the signals. A failed software download can also cause the code. Engine torque and speed are limited while the fault remains.
Possible causes
- Input signals for vehicle speed, accelerator pedal or brake pedal do not agree
- Failed or incomplete software download to the engine control module
- Damaged engine control module (ECM)
What you can do
- 1Check that the accelerator and brake pedals move freely and are not held back by a mat or object
- 2Check the battery condition and that the terminals are tight, since voltage disturbances can cause faults in the engine control module
- 3If you have a diagnostic tool, watch vehicle speed, accelerator position and brake pedal position in live data while driving; the values should match how the car is moving
- 4Have a workshop check that the engine control module has the latest software and reload it if the earlier download failed
- 5If the fault remains after these checks, the engine control module is probably damaged and a workshop should replace it
Symptoms you may notice3
- Text message and warning symbol in the display
- Poor performance or the car lacks power
- Malfunction indicator lamp lit or behaving abnormally
What the fault can affect2
- Engine torque is limited
- Engine speed is limited
General guidance for car owners. Diagnosis on the car can point to a different cause.