VOLVO
ECM-1001 - Engine control module (ECM) Internal fault
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
3 modelsC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (9)
- Volvo C30 (2007–2013)2008–2009Engine B4184S11, B4184S8, B4204S3 only
- Volvo C30 (2007–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
- Volvo C30 (2007–2013)2011–2013Engine B4204S3, B4204S4 only
- Volvo S40 (2004–2013)2008–2009Engine B4184S11, B4184S8, B4204S3 only
- Volvo S40 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
- Volvo S40 (2004–2013)2011–2012Engine B4204S3, B4204S4 only
- Volvo V50 (2004–2013)2008–2009Engine B4184S11, B4184S8, B4204S3 only
- Volvo V50 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
- Volvo V50 (2004–2013)2011–2012Engine B4204S3, B4204S4 only
What does this fault code mean?
The ECM has logged an internal fault. This code is set because of another fault in the control module, so that fault should be fixed first. The code can be cleared once the other fault is remedied.
Possible causes
- A separate fault elsewhere in the module, to be traced first
What you can do
- 1Read out the other fault codes in the control module and trace them first
- 2Clear this code only after the other faults are remedied, then road test the car to see whether it returns
- 3If it returns, the control module is probably the cause; a workshop should decide whether it needs replacing
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.