Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-1203
    VOLVO

    ECM-1203 - Fuel injection system driver. Signal missing

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    4 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (10)
    • Volvo C30 (2007–2013)2007Engine D4204T only
    • Volvo C30 (2007–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo C70 (2006–2013)2008Engine D4204T only
    • Volvo C70 (2006–2013)2009–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo S40 (2004–2013)2004–2006Engine D4204T, D4204T2 only
    • Volvo S40 (2004–2013)2007Engine D4204T only
    • Volvo S40 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo V50 (2004–2013)2004–2006Engine D4204T, D4204T2 only
    • Volvo V50 (2004–2013)2007Engine D4204T only
    • Volvo V50 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only

    What does this fault code mean?

    This code applies to the injector valve on cylinder 3, where the injection time has been incorrect. The control module has its own output stage for each injector and compares the time of every injection with the expected value. The last digit of the code shows cylinder 3.

    Possible causes

    • Contact resistance, oxidation or poor contact in the connections
    • Open circuit in the signal cable (+)
    • Open circuit in the signal cable (-)
    • Damaged injector

    What you can do

    1. 1Read the codes, clear them and road test to see whether the code comes back
    2. 2Check the connector on the cylinder 3 injector for play and oxidation
    3. 3Use a multimeter to check that the two wires to cylinder 3 are not broken and have no contact with ground or supply voltage
    4. 4If the code returns after clearing and a test drive and no fault is found, a workshop should try a new injector valve

    Symptoms you may notice2

    • The engine lacks power and runs poorly
    • A message and a warning symbol appear in the display

    What the fault can affect2

    • Engine speed is limited
    • The car can be driven in limp-home mode

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.