VOLVO
ECM-1330 - Air mass. Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The ECM watches the temperature sensor signal inside the MAF sensor. The fault is set when that signal is faulty. The cause can be connections, wiring or the sensor inside the MAF sensor.
Possible causes
- Contact resistance, oxidation or open circuit in the connections
- Signal wire shorted to voltage
- Damaged intake air temperature sensor inside the MAF sensor
- Signal wire shorted to ground
What you can do
- 1Read the fault code, clear it and test drive to see whether it returns
- 2Check the MAF sensor connections for contact resistance, play and oxidation
- 3Check the wiring to the MAF sensor for breaks, chafing and shorts to voltage or ground
- 4With a multimeter, check that the signal wire is not shorted to voltage or ground
- 5If you have a diagnostic tool: read air mass in live data and check that it rises as engine speed rises
- 6If the connections and wiring are fine: have a workshop check the MAF sensor
Symptoms you may notice3
- Engine warning lamp comes on
- A text message appears in the display
- Reduced performance
What the fault can affect2
- A calculated value is used instead of the sensor reading
- Engine torque may be limited
General guidance for car owners. Diagnosis on the car can point to a different cause.