Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-1572
    VOLVO

    ECM-1572 - Stop lamp switch/pedal position sensor. Signal missing

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    3 models

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (13)
    • Volvo C30 (2007–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
    • Volvo C30 (2007–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
    • Volvo C30 (2007–2013)2011–2013Engine B4204S3, B4204S4 only
    • Volvo S40 (2004–2013)2005Engine B4184S11 only
    • Volvo S40 (2004–2013)2006Engine B4184S11, B4184S8 only
    • Volvo S40 (2004–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
    • Volvo S40 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
    • Volvo S40 (2004–2013)2011–2012Engine B4204S3, B4204S4 only
    • Volvo V50 (2004–2013)2005Engine B4184S11 only
    • Volvo V50 (2004–2013)2006Engine B4184S11, B4184S8 only
    • Volvo V50 (2004–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
    • Volvo V50 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
    • Volvo V50 (2004–2013)2011–2012Engine B4204S3, B4204S4 only

    What does this fault code mean?

    The ECM receives no signal from the brake light switch or from the brake pedal sensor, which sends its signal over the CAN bus. The fault code is set when both signals are missing.

    Possible causes

    • Contact resistance or oxidation in the connections
    • Damaged brake light switch
    • Damaged brake pedal sensor

    What you can do

    1. 1Switch off the ignition and check the connectors at the brake pedal for play, contact resistance and oxidation
    2. 2With a multimeter, check that the ground wire is intact and not in contact with voltage
    3. 3If you have a diagnostic tool: check in live data that the brake light switch signal changes when the brake pedal is pressed
    4. 4Brakes are safety-critical. If the pedal feels different, do not drive the car until a workshop has checked the braking system
    5. 5If the fault remains, have a workshop check the brake pedal sensor

    Symptoms you may notice1

    • No noticeable symptoms for the driver

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.