Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-2121
    VOLVO

    ECM-2121 - Throttle/Pedal Position Sensor/Switch D Circuit Range/Performance

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    4 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (5)
    • Volvo C30 (2007–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo C70 (2006–2013)2008Engine D4204T only
    • Volvo C70 (2006–2013)2009–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo S40 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only
    • Volvo V50 (2004–2013)2008–2010Engine D4204T only · Transmission MMT6, MPS6 only

    What does this fault code mean?

    The engine control module checks the pedal sensor's signal and stores the code when the value is too low, that is outside its permitted range. If the car shows none of the symptoms at the moment, the fault may be intermittent.

    Possible causes

    • Contact resistance or oxidation in the connectors
    • Signal cable short-circuited to ground
    • Damaged accelerator pedal position sensor

    What you can do

    1. 1Check that the relevant fuses are intact; their locations are given in the owner's manual
    2. 2Test the relevant functions of the car on a test drive to see whether the symptoms return
    3. 3Check the connectors at the accelerator pedal and where the cable joins the control module for oxidation and contact resistance
    4. 4Have a diagnostic tool? Read the accelerator pedal value in live data while you press the pedal slowly from one end stop to the other, and check that the value changes smoothly
    5. 5Use a multimeter to check that the signal cable from the accelerator pedal position sensor is not in contact with ground
    6. 6If the connectors and cable are sound but the fault remains, have a workshop replace the accelerator pedal position sensor

    Symptoms you may notice2

    • Text message and warning symbol in the display
    • The car feels weak and lacks power

    What the fault can affect1

    • Engine torque may be limited

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.