Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-2126
    VOLVO

    ECM-2126 - Accelerator pedal (AP) position sensor, circuit 2.Faulty signal

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    3 models

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (13)
    • Volvo C30 (2007–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
    • Volvo C30 (2007–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
    • Volvo C30 (2007–2013)2011–2013Engine B4204S3, B4204S4 only
    • Volvo S40 (2004–2013)2005Engine B4184S11 only
    • Volvo S40 (2004–2013)2006Engine B4184S11, B4184S8 only
    • Volvo S40 (2004–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
    • Volvo S40 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
    • Volvo S40 (2004–2013)2011–2012Engine B4204S3, B4204S4 only
    • Volvo V50 (2004–2013)2005Engine B4184S11 only
    • Volvo V50 (2004–2013)2006Engine B4184S11, B4184S8 only
    • Volvo V50 (2004–2013)2007–2009Engine B4184S11, B4184S8, B4204S3 only
    • Volvo V50 (2004–2013)2010Engine B4184S11, B4184S8, B4204S3, B4204S4 only
    • Volvo V50 (2004–2013)2011–2012Engine B4204S3, B4204S4 only

    What does this fault code mean?

    The engine control module checks the pulse length of the PWM signal from accelerator pedal circuit 2 and stores the code when it is incorrect. A damaged accelerator pedal position sensor can cause the fault, and the code may also be stored incorrectly after a control module in the car has been reprogrammed.

    Possible causes

    • Damaged accelerator pedal position sensor

    What you can do

    1. 1Check the wiring and connectors at the accelerator pedal for chafing, play and corrosion
    2. 2Have a diagnostic tool? Follow the pedal movement in live data while you press and release the pedal slowly, and check that the circuit 2 signal follows the movement
    3. 3If a control module in the car has recently been reprogrammed, the code may have been stored incorrectly, so clear it and road test before replacing any part
    4. 4If the fault returns, have a workshop replace the accelerator pedal position sensor

    Symptoms you may notice1

    • The engine responds poorly when you press the accelerator

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.