What does fault code ECM-2360 mean?

Diagnostic fault code details for ECM-2360 (Volvo S80 (1999–2006), Volvo S80 (1999–2006), Volvo S80 (1999–2006)). Repair service at OBD Tuning.

VOLVO

ECM-2360 - Injector 6. Signal missing. Intermittent fault

System

Engine Control Module (ECM)

Volvo models this fault code applies to

Applies to the following models:

2 models

S80 (1999–2006), XC90 (2003–)

Show models by year and engine (4)

What does this fault code mean?

The signal to injector 6 has dropped out briefly but is not present now. The fault is sporadic and may lie in the connector, the wire to the valve or the feed from the system relay.

Possible causes

Open circuit in the signal wire
Open circuit in the power supply to the injector
Contact resistance in the connections

What you can do

1Check that the connector to injector 6 is secure and free from oxidation and play
2With the ignition on, press gently on the connector at valve 6 and see whether the signal briefly drops out
3Use a multimeter to check that the feed from the system relay to injector 6 is not interrupted
4If you have a diagnostic tool: note the fault status after a test drive and judge whether the fault is permanent or temporary
5If the fault remains, have a workshop decide whether the wiring or the valve needs attention

Symptoms you may notice2

Engine not firing on all cylinders
Malfunction indicator lamp (MIL) lit

General guidance for car owners. Diagnosis on the car can point to a different cause.