VOLVO
ECM-244D - Front heated oxygen sensor (HO2S), bank 1, heating. Signal too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) controls the heating of the front oxygen sensor on bank 1 by pulsing the current to the sensor's PTC element, and the pulse length depends on the sensor temperature. The code is stored when the signal reads under a set threshold with the heating switched off.
Possible causes
- Signal cable short-circuited to ground
- Damaged front heated oxygen sensor
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the oxygen sensor connector for corrosion and loose connections. Rust solvent spray and grease must not be used on it
- 3Follow the signal cable from the oxygen sensor and look for chafing and pinch damage, especially where it may touch the body
- 4Use a multimeter to check that the signal cable is not short-circuited to ground, meaning the car body
- 5If the cable is intact but the fault remains, have a workshop try a new oxygen sensor
Symptoms you may notice1
- The malfunction indicator lamp (MIL) is lit
What the fault can affect2
- Oxygen sensor control is switched off
- Fuel trim control based on the oxygen sensor is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.