VOLVO
ECM-24C0 - Front heated oxygen sensor (HO2S), bank 1. Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) checks the front oxygen sensor against the rear sensor and against what it expects from the engine. If the front sensor shows only air and no fuel/air mixture, or its signal conflicts with the rear sensor or with what is expected, the code is stored. The fault can lie in the front or rear sensor circuit.
Possible causes
- Oxygen sensor fitted incorrectly in the exhaust system
- Leakage in the exhaust system
- Short circuit to supply voltage or ground in the signal cable or in the pump and calibration current cables
- Open circuit in the signal cable (+)
- Damaged front heated oxygen sensor
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the oxygen sensor is correctly fitted in the exhaust system and that there are no leaks around it
- 3Look for air leaks in the exhaust system, such as cracks and leaking joints
- 4Follow the cables to the oxygen sensor and use a multimeter to check that they have no open circuit and are not short-circuited to supply voltage or ground
- 5If the cables are intact, have a workshop try a new oxygen sensor, since a damaged front or rear sensor can also cause the fault
Symptoms you may notice1
- The malfunction indicator lamp (MIL) is lit
What the fault can affect3
- Oxygen sensor control is switched off
- Long-term fuel trim is switched off
- Catalytic converter diagnostics are switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.